FURUNO · Autopilots

FURUNO NAVpilot-1000 Autopilot

HCS type-approved autopilot for analog and solenoid steering systems

HCS (Heading Control System) type-approved autopilot for analog or solenoid steering systems on vessels up to 100 m, with IMO and non-IMO modes, auto tuning and six work profiles.

Model
NAVpilot-1000
Type
Autopilot
For
Merchant Marine, Workboats, Fishing Vessels

Price and availability on request. We handle supply, installation and support.

Overview

The NAVpilot-1000 is a Heading Control System (HCS) type-approved autopilot that connects to the analog or solenoid steering systems often used on relatively large vessels. It has both IMO and non-IMO modes depending on the steering type and operating requirements, and is designed for vessels of 100 m or smaller.

An advanced steering algorithm, Auto Tuning and six saved Work Profiles keep the course steady in changing sea conditions. A 5.7 inch colour control unit with a rotary knob is easy to use in rough weather, an optional follow-up remote controller is available, and AUTO and NAV modes can be controlled from NavNet TZtouch MFDs over NMEA 2000.

Key features

Suits many vessel types

Supports inboard, stern drive, water jet and azimuth drive with a single rudder or multi-rudders under single control.

Analog and solenoid steering

Analog rudder drive (voltage/current) and solenoid (or relay) steering interfaces.

Advanced AUTO mode

Advanced steering algorithm for larger vessels, with TURN mode for smooth turns.

Work Profiles

Saves six profiles of parameters for different sea conditions, locations or operators.

Auto Tuning

Zig-zag run adjusts rudder gain, counter rudder and rate of turn to the vessel automatically.

HCS type approved

Type Approval for Heading Control System and heading control system for high speed craft.

Easy to read, robust controls

5.7" colour control unit with rotary knob and buttons that work in rough seas.

Remote controller (option)

FAP-FU2000 follow-up remote controller with IMO Module B type-approved configuration, IPX6 front.

NAV mode and MFD link

Follows a route in NAV mode (non-IMO) and connects to NavNet TZtouch MFDs via NMEA 2000.

Specifications

Control unit
Display 5.7" colour LCD, 115.2 (W) x 86.4 (H) mm, VGA 640 x 480
Backlight 720 cd/m²
Units in a network Up to 6 units (FAP-10001 and FAP-FU2000 in total)
Processor unit
Steering modes STBY, AUTO, Advanced AUTO, NAV (Standard/Precision, non-IMO), FU-RC, NFU-RC, FU-KEY, NFU-KEY, DISENGAGED (remote/keyboard modes require the RRU)
Rate of turn 0.1-10 deg/s
Rudder angle settings ±45 deg
Rudder control (analog) Voltage 0 to 5 V (min.), -10 to +10 V (max.); current 4 to 20 mA
Solenoid / clutch-bypass drive On/Off, common negative, 3 A max.
Interface
Ports Serial 4 ports (IEC 61162-1 / NMEA 0183), LAN 1 port (100Base-TX), NMEA 2000 1 port, USB 1 port, 6 universal outputs, 4 universal inputs
Remote controller (option)
FAP-FU2000 2.0" colour LCD 320 x 240; up to 5 units; NMEA 2000; IPX6 front, IPX5 rear
Environment
Temperature -15°C to +55°C; relative humidity 93% or less at +40°C
Waterproofing Processor and control unit IP22
Power Supply
Power Processor unit 12-24 VDC, 4.0-2.0 A
Dimensions
Size / weight Processor unit 397.8 (H) x 440 (W) x 100 (D) mm, 6.0 kg; control unit (deck mount) 164 x 277 x 112 mm, 1.2 kg; remote controller 144 x 80 x 66 mm, 0.77 kg

Specifications are provided by the manufacturer and may change without notice.

Product inquiry

Interested in the NAVpilot-1000?

Fill in the form and one of our engineers will get back to you with pricing, lead time and the right configuration for your vessel.

FURUNO NAVpilot-1000 Autopilot FURUNO

Related products

NAVpilot-1000 Request a quote